How to use Lightspeed 955 Amplifier
1. POWER LIGHT:
This light will turn blue when power is on.
2. POWER BUTTON:
Press and hold this push button to turn the system power on or off.
3. MICROPHONE VOLUME CONTROL:
Controls the volume level of the microphones.
4. AUDIO IN VOLUME CONTROL:
Controls the volume level of the audio sources connected to the audio inputs on back of the 955 Access.
5. TONE CONTROL:
Adjusts the audio tone adding more bass or treble for a more rich or more crisp tone.
6. AUDIO OUT VOLUME CONTROL:
Controls the volume level of the audio output
7. AUDIO OUTPUT JACK:
3.5mm stereo connector for connecting to an assisted listening device (ALD) or to a computer for recording.
8. MIC 1 & MIC 2:
Microphone link and registration indicators.
• Solid green indicates an audio link has been established.
• Flashing amber indicates registration is in process.
• Solid green indicates an audio link has been established.
• Flashing amber indicates registration is in process.
9. SYSTEM ID LABEL:
On bottom of unit (not shown) to identify it with registered components.
(Directions and photo provided are for the older 955 model)
Note: Full User Guide from Lightspeed Attached
955N_User_Manual_MN0623US01-2-1.pdf
DataImage89.png
| Files | ||
|---|---|---|
|
|
||
|
|
DataImage89.png
36 KB
|